REM Pod EMT + Cold Spot Detector

Description

The REM-Pod-EMT is a ghost hunting device that uses a small antenna to emit a low EMF (electromagnetic magnetic field) around itself up to 5" away. It also well as cold/hot spot detection with the included thermocouler probe. The electromagnetic field it radiates is sensitive to any materials or objects that conduct electricity. Depending on the strength, proximity and distortion of the field, the lights on top will turn on/off in different combinations.

The new model of REM Pod includes an audible alert for significant changes in temperature as well as changes in EMF. The REM Pod provides manual or automatic baseline correction in addition to a programmable REM sensitivity "range" adjustments in 5-steps of strength, from 1 to 5 inches. At the bottom of the Rem Pod, you'll find a threaded inside to give the possibility of threading onto a pipe or tripod that matches inside diameter. Underneath the pod you'll find an on/off switch, which activates the nearby power light, the pre-installed battery and the baseline button as well as the sensitivitiy button to change the 5 sensitivitiy ranges.

If you do not wish to use the baseline button underneath there's a automatic baseline correction by holding the antenna with your hand until the audible tone changes. Please note, you may want to use lower sensivitity ranges when there's a chance of interferrence like that from flourescent lights or certain handheld communication device at certain frequencies or power.

Features

- Emits an EMF (electromagnetic field) to detect any changes to it
- Alerts detection with LED lights and audible beeps
- Audible tones correlate to strength of disturbance
- LED Colours: Red, Green, Blue, Yellow, Purple
- REM Sensitivity: Instant response to fluctuations/spikes
- Sensitivity Ranges: 1-2", 2-3", 3-4", 4-4.5", 4.5-5"
- Temperature +5 / -5 degree hot/cold spot detection
- Auto or Manual temperature baselining "Zero"
- Auto or Manual REM baselining "Zero"
- Power: 9V Battery (included)